Sony Vaio laptop disassembly

When it comes to Sony Vaio laptop disassembly from the beginning know that this time, a process is a challenge, because all the parts, small screws on the laptop and remove Sony VGP-BPS13/S battery all together. But there are times when you are forced to do the time, some parts of the hardware. But if you know the right steps and tools to do the job, you will definitely succeed, do things for themselves. First, you need a Phillips screwdriver and slotted screwdriver.

First, unplug the line to draw, batteries and other accessories in the laptop is connected. Wait about 10 minutes before removing the Sony laptop. Turn the computer from the wall before you start it off. Next to the laptop and remove the lid Philips screws on the hard disk. You can find Sony VGP-BPS13/B battery on the left. Put all the screws and parts in one place so you can find it when it's time together, all of the laptop. Now remove the cover screws and remove the memory card appears.

Remove the RAM modules and put them aside. There should be three screws holding the space on the hard disk. Remove them and slide the hard drive on the left side and remove the main board of the computer. Now you can use a laptop hard drive. Time on DVD. After you remove the two Phillips head, you can use laptop chassis and set aside. Remove all the screws at the bottom of the laptop. The Sony VGP-BPS13A/B battery has three locks needed to be excluded. Click on a flat head screwdriver and gently open the two locks on the DVD section.

These locks can break easily, do not use excessive force when they are with them. Using a screwdriver, while the keyboard frame, which is located between the keyboard and screen of the laptop. Place the disk on the side and go to the next step. It is time for the Sony VGP-BPS13A battery to remove. Remove the two black Philips screws and lift the keyboard to the chassis and put his head on the palm and the beginning of the song. Keyboard with a large ribbon cable to the motherboard. The clear tape to remove from the socket and press the keyboard connector on the ice claws.

Be very careful connecting, because if it breaks, you need the whole motherboard replaced. What is the LCD screen and wireless LAN cards, cables can be easily removed and easily transferred to the motherboard. Remove the Phillips screw at the end, six of which give security hinges in place and lift the screen frame of the laptop. Finally, you can get a box on his head on the laptop and remove the lower bowl and set aside. And there you have Sony vgp-bps9/s all you need to know about the Sony Vaio laptop disassembly.

Sony,hardware,Sony Vaio laptop,technology,computer

This content via batterychat blog